DRAM failed when booting U-boot 2009.03

[Gurit Perdana]

Hi Heiko,

Could you tell me how to make U-boot pass to check my DRAM even if it is a
failure so I can go into the operating system?
Thank you


Best regards,

Gurit Perdana


On Mon, Jul 4, 2022 at 3:47 PM Matthias Brugger <mbrugger at suse.com> wrote:

>
>
> On 02/07/2022 19:40, Gurit Perdana wrote:
> >
> > Hi Christophe,
> >
> > Thank you for your response. It is working with same version of U-boot.
> If it is
> > hardware failure, should I replace the DRAMs only?
>
> Do I understand that you didn't flashed a new U-Boot binary but the
> version one
> it used to work for years now is not working anymore? In this case it's
> most
> likely a HW/DRAM problem.
>
> For me that wasn't clear from your message.
>
> Regards,
> Matthias
>
> > I look forward to hearing from you.
> >
> > Best regards,
> >
> > Gurit Perdana
> >
> >
> > On Sun, Jul 3, 2022, 00:32 Christophe Leroy <christophe.leroy at csgroup.eu
> > <mailto:christophe.leroy at csgroup.eu>> wrote:
> >
> >     Hi
> >
> >     Le 02/07/2022 à 19:20, Gurit Perdana a écrit :
> >      > Hello Heiko,
> >      >
> >      > Thank you for your email. Have you gotten same problem before?
> Just for
> >      > your information, the board was working for years.
> >
> >     Was it working for years with the same version of U-boot ?
> >
> >     If yes it is likely a hardware failure.
> >
> >     If not, you should try with latest version of U-boot.
> >
> >     Christophe
> >
> >
> >      >
> >      > Best regards,
> >      >
> >      > Gurit Perdana
> >      >
> >      >
> >      >
> >      > On Mon, Jun 27, 2022, 20:16 Heiko Schocher <hs at denx.de <mailto:
> hs at denx.de>
> >      > <mailto:hs at denx.de <mailto:hs at denx.de>>> wrote:
> >      >
> >      >     Hello Gurit Perdana
> >      >
> >      >     On 24.06.22 09:46, Gurit Perdana wrote:
> >      >      >
> >      >      >
> >      >      > Hi All,
> >      >      >
> >      >      >
> >      >      >
> >      >      > I have an error MPX8349 R5 V15 A2. I will show you my error
> >      >     below. What should I do to solve this?
> >      >      >
> >      >      > I am looking forward to hearing from you. Thank you.
> >      >
> >      >     It seems you have problems with your DRAM setup... you need a
> debugger
> >      >     to look whats going on...
> >      >
> >      >     bye,
> >      >     Heiko
> >      >     --
> >      >     DENX Software Engineering GmbH,      Managing Director:
> Wolfgang Denk
> >      >     HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> Germany
> >      >     Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email:
> >      > hs at denx.de <mailto:hs at denx.de> <mailto:hs at denx.de <mailto:
> hs at denx.de>>
> >      >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.denx.de/pipermail/u-boot-board-maintainers/attachments/20220718/0dd22ddc/attachment.htm>