[U-Boot-Users] Need Help w/ PPC Boot
Wolfgang Denk
wd at denx.de
Thu Dec 26 20:36:20 CET 2002
Dear Jerry,
in message <EGEGIJHKDKJGAJMGIDPNIEEICDAA.jwalden at digitalatlantic.com> you wrote:
>
> I apologize in advance if this is a stupid question, or a question
> with an obvious answer. The fact is that I have place linux on
> and ARM, and an X86 board, however never on a PPC platform. In
> fact I have very little experience with the PPC, and RISC processors
> in general. I am trying to trace my way through the u-boot code -
> since I do not have access to an in circuit emulator, I am somewhat
You don;t need an ICE, but you definitely want a debugger.
> hindered. However I do have the capability to turn on a LED via a
> GPIO register. So I am tracing through the code in a "burn an learn"
> fashion.
How much do you rate your time? I strongly recommend to get yourself
a BDI2000...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
In theory, there is no difference between theory and practice. In
practice, however, there is.
More information about the U-Boot
mailing list