[U-Boot-Users] RE: start / load addresses for initrd

[Jerry Walden]

Okay - I don't want to use thier tools - can you see anything obvious that
is missing from the initrd (fsimage.tar) file.

Since I do not want to use thier tools where can I find info on
making a proper initrd (I already read Documentation/initrd.txt).

Sorry - this thread should be moved over to the embedded Linux
forum - It started out as a u-boot question 'cause I thought
that my env variables were wrong.

Thanks

Jerry

-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Wolfgang
Denk
Sent: Tuesday, April 01, 2003 6:52 PM
To: jwalden at digitalatlantic.com
Cc: U-Boot-Users at Lists. Sourceforge. Net
Subject: Re: [U-Boot-Users] RE: start / load addresses for initrd


In message <EGEGIJHKDKJGAJMGIDPNKEFKCKAA.jwalden at digitalatlantic.com> you
wrote:
>
> >Where did you get "fsimage.tar" from?
> I made it using info obtained from MontaVista Support.
> Essentially I used thier Target Configuration Tool -

Sorry, but I guess you should ask MV support about the problems  with
their tools.


Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Our business is run on trust.  We trust you will pay in advance.


-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users