[U-Boot-Users] u-boot ...bootup warning bad crc

Siddharth D Tiwari siddharthdt at myw.ltindia.com
Fri Apr 4 15:23:14 CEST 2003


Hi all,

I'm trying to boot motorola's FADS823 eval. board with U-boot 0.2.0.
I was successfully able to program the flash with U-boot configured for FADS823  but with the following problem:
As soon as i reset,  the output is as follows and it hangs.....plz. help me in this regards...

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
 .

U-Boot 0.2.0 (Apr  4 2003 - 16:43:01)

CPU:   PPC823ZTnnA at 40 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: FADS with db MPC823 rev ENG or PILOT
I2C:   ready
DRAM:  (4 MB SDRAM)  8 MB
FLASH:  2 MB
*** Warning - bad CRC, using default environment


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

The output was as above.....
I have no idea where to look for, although i'm looking into the U-boot code.....
I'll be grateful for any help.

rgds,
Sid.





More information about the U-Boot mailing list