[U-Boot-Users] Why my image isn't boot?

[Wolfgang Denk]

In message <00af01c2fe45$e8dab100$fe02a8c0 at esd11> you wrote:
> I use the u-boot cvs source,
> linux-2.4.19 kernel, arm-linux patch, and xscale patch.
> arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.
> 
>     arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin
>     gzip -9 linux.bin
>     mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n
> "Linux Kernel Image" -d linux.bin.gz uImage
> then under u-boot:
>     =>loadb 0xa0008000 (send the uImage)
>     =>go 0xa0008000
>     start the application at 0xa0008000
>     <hang>
> 
> Could someone help me about this? Thanks a lot.

Type "where" and "bt" at your GDB prompt.  Umm...  you  are  using  a
debugger like the BDI2000, aren't you?


Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Schshschshchsch.
	-- The Gorn, "Arena", stardate 3046.2