[U-Boot-Users] Why my image isn't boot?
Zhao Hongda
zhaohd at vis.cs.tsinghua.edu.cn
Wed Apr 9 05:43:47 CEST 2003
I want it run from flash, but if I use "loadb 0x00100000", after transfer
the uImage, "md 0x00100000" shows that flash data is wrong,
what should I do?
Hongda Zhao
> ----- Original Message -----
> From: <richard at uclinux.net>
> To: "Zhao Hongda" <zhaohongda at tsinghua.org.cn>
> Sent: Tuesday, April 08, 2003 5:23 AM
> Subject: Re: [U-Boot-Users] Why my image isn't boot?
>
>
> > > I use the u-boot cvs source,
> > > linux-2.4.19 kernel, arm-linux patch, and xscale patch.
> > > arm-linux-gcc 3.0 as complier,lubbock(pxa250) as platform.
> > >
> > > arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux
> linux.bin
> > > gzip -9 linux.bin
> > > mkimage -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e
> 0xa0008000 -n
> > > "Linux Kernel Image" -d linux.bin.gz uImage
> > > then under u-boot:
> > > =>loadb 0xa0008000 (send the uImage)
> > > =>go 0xa0008000
> > > start the application at 0xa0008000
> > > <hang>
> > >
> >
> > You try to start a compressed kernel from RAM?
> >
> >
> > Rick
> >
>
More information about the U-Boot
mailing list