[U-Boot-Users] SCC ethernet TX not ready

[xie michael]

hi, there :

I use FADS860T in my board , and i changed some files , i use SCC1 for the 
ethernet , but the 'ping ' command doesn't work , what's the error ? how 
can i make it work ? thanks a lot!

CPU:   XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
Board: SCOP860 rev 1.0
SDRAM:  16 MB
FLASH:  4 MB
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

U-Boot 1.0.0 (Dec 12 2003 - 11:40:07)
=>ping 192.168.0.1
TX timeout
TX not ready
TX timeout
ping failed; host 192.168.0.1 is not alive

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn