[U-Boot-Users] relocate code

[Jerry Walden]

Greetings:

It looks like I have made enough progress in programming the various
registers of the PPC405GPr to get
"relocate_code".  My problem is now this - I continue after the "return" in
relocate_code (which I
realize is not meant to return).  So now I type cont, and check to see if
there is any action on the
UART, and there is none - so I tell the BDI to halt, and the pc is at 0x70C.

How can I trace down a problem, after "relocate_code" is complete?

Thanks

Jerry