[U-Boot-Users] How can I save zImage & fsimage.tar into Flash memory then boot

[Jacob Chan]

Dear all,
I am using the Intel DBPXA255 Lubbock board.
After I download the u-boot.bin via JTAG that using BDI2000.
It can boot but the Ethernet device(SMSC LAN91C96) is not work. So I
using serial download(Kermit mode) zImage to the address 0xa0200000.
loadb 0xa0200000  <-- using HyperTerminal Kermit mode to download
After that I can using go 0xa0200000 to boot linux kernel, but how can I
save it to Flash?
I try cp 0xa0200000 0x00080000 0x000a0578 
After that I reboot the target board and how can I boot the linux
kernel?
I use bootm 0x00080000, but it's not work.
Finally, I wan to save u-boot.bin, zImage and filesystem.tar into Flash
then boot.
What should I need to do? Your reply and support will be highly
appreciated.

Thank you for your time and attention

Jacob Chan
Jacob_chan at so-net.net.tw