[U-Boot-Users] patch for TI OMAP 1510 board for u-boot 0.4.0 - part a

[Gupta, Kshitij]

hi,
	I am submitting a patch for TI OMAP 1510 board (based on Arm925) for
u-boot 0.4.0.  Since I am doing it for the first time I might have left out
a few silly things,  It will be really helpful if you can give me comments
on the patch.  And also is there a naming convention I should follow while
submitting a patch.

Since the patch is quite huge , I have divided the patch has been divide
into four 
There is no logical partitioning between these patches.  Please apply them
in sequence.   

patch 1 - patch-omap1510-a.tar.bz2
	file CHANGELOG
	file CREDITS
	file MAINTAINERS
	file MAKEALL
	file Makefile
	file README
	file board/omap1510inn/Makefile
	file board/omap1510inn/config.mk
	file board/omap1510inn/flash.c
	file board/omap1510inn/omap1510innovator.c
	file board/omap1510inn/platform.S
	file board/omap1510inn/u-boot.lds
	file common/cmd_boot.c
	file common/cmd_nand.c
	file cpu/arm925t/Makefile
	file cpu/arm925t/config.mk
	file cpu/arm925t/cpu.c
	file cpu/arm925t/interrupts.c
	file cpu/arm925t/omap925.c
	file cpu/arm925t/start.S

patch 2 - patch-omap1510-b.tar.bz2
	file drivers/Makefile
	file drivers/crpath
	file drivers/ns16550.c
	file drivers/serial.c
	file drivers/smc91111.c
	file examples/Makefile
	file include/arm925t.h
	file include/asm-ppc/hymod.h
	file include/common.h
	file include/configs/omap1510.h
	file include/configs/omap1510inn.h
	file include/flash.h
	file include/linux/mtd/nand.h
	file include/ns16550.h

patch 3 - patch-omap1510-c.tar.bz2
	file drivers/smc9196.c
	file drivers/smc9196.h
	file include/asm-arm/arch-arm925t/arch_ck.h
	file include/asm-arm/arch-arm925t/ck.h
	file include/asm-arm/arch-arm925t/dma.h
	file include/asm-arm/arch-arm925t/fpga.h
	file include/asm-arm/arch-arm925t/hardware.h
	file include/asm-arm/arch-arm925t/innovator.h
	file include/asm-arm/arch-arm925t/io.h
	file include/asm-arm/arch-arm925t/irq.h
	file include/asm-arm/arch-arm925t/irqs.h

patch 4 - patch-omap1510-d.tar.bz2

	file include/asm-arm/arch-arm925t/keyboard.h
	file include/asm-arm/arch-arm925t/mcbsp.h
	file include/asm-arm/arch-arm925t/memory.h
	file include/asm-arm/arch-arm925t/omap1510_dpm.h
	file include/asm-arm/arch-arm925t/omap1510p1.h
	file include/asm-arm/arch-arm925t/omap_pm.h
	file include/asm-arm/arch-arm925t/param.h
	file include/asm-arm/arch-arm925t/pm.h
	file include/asm-arm/arch-arm925t/preem_latency.h
	file include/asm-arm/arch-arm925t/serial.h
	file include/asm-arm/arch-arm925t/sizes.h
	file include/asm-arm/arch-arm925t/system.h
	file include/asm-arm/arch-arm925t/time.h
	file include/asm-arm/arch-arm925t/timer.h
	file include/asm-arm/arch-arm925t/timex.h
	file include/asm-arm/arch-arm925t/uncompress.h
	file include/asm-arm/arch-arm925t/vmalloc.h

This patch I am submitting is as a diff to the u-boot 0.4.0 version.
To compile the code for omap we have to run make omap1510inn_config.
warm regards
-kshitij
--------------------------------------------
        ****
        ****             Kshitij
     ******o****      Software Engineer
********_///_****     Texas Instruments
 ******/_//_/*****    Wind Tunnel Road
  ** ***(__/*****     Bangalore
      *********       Voice: +91-80-5048090
       *****          Fax:   +91-80-5099730
         ***                           
--------------------------------------------

-------------- next part --------------
A non-text attachment was scrubbed...
Name: patch-omap1510-a.tar.bz2
Type: application/octet-stream
Size: 17663 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20030709/7bebcad8/attachment.obj