[U-Boot-Users] Serial terminal & u-Boot

[Michael Frey]

I see this as well.  I am running on a custom pxa255 board.  I get 
around this problem by setting the bootdelay to 0.

Michael

On Friday, July 18, 2003, at 01:11  PM, Brian S. Park wrote:

> Hi all,
> I'm using u-Boot 0.4.0 with our custom board based on IBM walnut.
> I noticed that if I do not have the HyperTerminal running, the boot 
> process never proceeds.
>
> If I power up the target with out HyperTerminal running, it never 
> comes up. As soon as start HyperTerminal, I see print out for Kernel 
> download and the board boots up. It looks as though it was waiting for 
> the serial communication before it starts downloading the kernel over 
> the ethernet.
>
> Is this normal behavior? Is there a way to make it boot up regardless 
> of whether a serial terminal is connected or not?
>
> Thank you
>
> Brian
>
>
> ===============================================================
> Brian S. Park  brian at corelis.com  (562) 926-6727 x143
> ---------------------------------------------------------------
> Everything we do helps our customers get to market
> FASTER with HIGHER quality and LOWER cost
> ===============================================================
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
> same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users