[U-Boot-Users] Doubt on Kernel Linking

Rupesh S rupeshs at myw.ltindia.com
Sat May 24 02:30:42 CEST 2003


Hi,

I work with MPC823FADS board.

I'm using u-boot as the bootloader in it.
The RAM memroy map as seen with the "bdinfo" command in u-boot says.. 0x00000000 to 0x00800000.

I'm trying to boot linux kernel ( linux-2.4.4-2002-10-06 from DENX) on my board.
By default , the kernel is build at 0xC0000000. (This memory is not mapped by u-boot). 

Do I have to change the kernel linking to a address that is within, 0x00000000 and 0x00800000 ?

Rupesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20030523/ace5e051/attachment.htm 


More information about the U-Boot mailing list