[U-Boot-Users] Re: Ethernet on PPC Ebony not working
pba at sysgo.com
Fri Nov 21 18:43:10 CET 2003
I guess you are using 10MB ethernet. In the 440 is between EMAC and PHY
inserted so called ZMII bridge, which can operate in several modes. If
is in the RMII mode then is necessary to set correct speed in the ZMII
Speed Select Register.
The following patch will fix this problem.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
More information about the U-Boot