[U-Boot-Users] LCD Driver

[Robert Schwebel]

On Tue, Sep 23, 2003 at 08:15:54PM -0700, Doris Bella wrote:
> I am searching the driver for the LCD module MTB-046
> in Linux. It is 128x64 graphics display LCD. The
> processor it supports is PXA255(ARM). 
> 
> MTB-046
> 
> MTB                  : Board assembly and custom
> design
> LCD Type             : STN Yellow Green
> Rear Polarizer       : Transflective
> Backlight Type       : LED, External Power, 5V input
> Backlight Color      : Yellow Green
> Temperature Range    : Wide
> EL Driver IC         : Not Buildin
> Touch Screen         : Without 
> 
> Module Size      - 74.6(W) x 52.7(H) x 9.0(D)Max
> Dot Size         - 0.40(W)mm x 0.40(H)mm
> Dot Pitch        - 0.43(W)mm x 0.43(H)mm
> Resolution       - 128(W) x 64(H) Dots Matrix
> Duty Ratio       - 1/64 Duty
> LCD Display Mode - STN(Yellow mode)
> Viewing Direction- 6 o' clock
> Backlight        - LED
> Controller       - KS0108 or compatible
> EL Driver        - Without
> DC/DC Converter  - Optional
>    Is there a LCD driver available for the above LCD
> module (MTB-046)?. The interface is through the GPIO
> pins provided in the PXA255 processor?. 	

Several people on linux-arm have given you hints but you seem to be
resistent against reading. It is absolutely of no interest which size
your display has. Find out what the electrical interface is, find out if
it is supported by the PXA onboard LCD controller. If yes, use the
driver which comes with the kernel. If not you probably have to write a
driver yourself or hire a support company... 

Regards,
Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hornemannstraße 12,  31137 Hildesheim, Germany
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4