[U-Boot-Users] U-Boot-1.1.0 released

[Figini Enzo]

I have done the porting from 1.0.0 to 1.1.0 of my board MPC8266 based
without problem (only recompiling), but I have a problem.
When u-boot starts, don't initialize machine A/B/C, so I can't access to I/O
(the first effect is that don't enable eth PHY).
BR/OR are correct.
I have not changed define in my config file.

Someone can tell me why this happen ??
There is some define that will be changed from 1.0.0 to 1.1.0 ??

Thanks.
  Enzo