[U-Boot-Users] How to enable EMAC1 on IBM 405EP Bubinga board?

[Andy Vo]

I'm trying to use the second EMAC channel on the IBM 450EP Bubinga board using U-boot but have no luck.  I modified all the EMAC registers to point to the new EMAC1 base address.  The PHY h/w is ok because I could tftp an image using the IBM monitor over the 2nd ethernet port.  Am I missing something obvious?  Thanks for any suggestion.

Andy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040414/406b90fe/attachment.htm