[U-Boot-Users] 512-Bytes EEPROM

Bruno jmmello2004 at yahoo.com.br
Fri Apr 23 15:51:25 CEST 2004


I'm porting U-Boot 1.1.0 to a board which has a
512-Bytes EEPROM. So, I set the define
CFG_I2C_EEPROM_ADDR_LEN to 2, to support the 16-bit
addresses. But the EEPROM doesn't worked fine, I can't
even read or write it. If I set this define to 1, the
EEPROM works properly (but only the first 256 bytes).

So, my question is: it's necessary set another
define/flag to user EEPROMs larger than 256 bytes?

Thanks in advance,



Yahoo! Mail - O melhor e-mail do Brasil! Abra sua conta agora:

More information about the U-Boot mailing list