[U-Boot-Users] 512-Bytes EEPROM

Wolfgang Denk wd at denx.de
Fri Apr 23 16:03:54 CEST 2004

In message <20040423135125.79058.qmail at web61309.mail.yahoo.com> you wrote:
> I'm porting U-Boot 1.1.0 to a board which has a
> 512-Bytes EEPROM. So, I set the define
> CFG_I2C_EEPROM_ADDR_LEN to 2, to support the 16-bit
> addresses. But the EEPROM doesn't worked fine, I can't
> even read or write it. If I set this define to 1, the
> EEPROM works properly (but only the first 256 bytes).
> So, my question is: it's necessary set another
> define/flag to user EEPROMs larger than 256 bytes?


Ummm.. Did you have a look at the README?

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
I paid too much for it, but its worth it.

More information about the U-Boot mailing list