[U-Boot-Users] U-Boot/Kermit Problem
Ashish R Dhawane
ashish at cdotb.ernet.in
Thu Apr 29 08:58:28 CEST 2004
I am facing a problem in loading a binary file from minicom.
Whenver I try to load, it is going in an infinite loop.
=> loadb 100000
## Ready for binary (kermit) download to 0x00100000 at 9600 bps...
I configured kermit as told in the DULG/SystemSetup Manual....
Only change I made is
set speed 9600 instead of 115200
I am getting stuck here. After going through the u-boot source code ....
The calling sequence is ....
-load_serial_bin
-k_recv
Inside k_recv the code where I stucked up here is ...
----------------------------ACTUAL CODE-----------------------------------
/* get a packet */
/* wait for the starting character or ^C */
for (;;) {
switch (serial_getc ()) {
case START_CHAR: /* start packet */
goto START;
case ETX_CHAR: /* ^C waiting for packet*/
return (0);
default:
;
}
}
----------------------------ACTUAL CODE UP TO HERE------------------------
I think it continiously in the for loop.
When I press control-C then it will come comeout saying ....
## Total Size = 0x00000000 = 0 Bytes
## Start Addr = 0x00100000
Can anyabody help me why it is happening ?
Any help will be appreciated.
-regards,
-Ashish
###########################################################################
Ashish R Dhawane
Research Engineer
W-CDMA Group (3G RAN)
Contacts:
---------
Tel(O) :+91-80-2282168 (Direct Line)
Tel(O/Lab) :+91-80-2263399 X 329
Fax(O) :+91-80-2282168
Mobile :98455 36814
E-Mail(s) :ashishdhawane at yahoo.com, ashish at cyberspace.org
Surface Address (O): Surface Address (R):
-------------------- --------------------
Centre for Development of Telematics, #50, Ground Floor, 12th Cross,
71/1, Sneha Complex, Ayyappa Block, Manorayan Palya,
Millers Road, Sultan Palya Main Road,
Bangalore-560052, RT Nagar Post,Bangalore-560032,
Karnataka, India. Karnataka, India.
###########################################################################
More information about the U-Boot
mailing list