[U-Boot-Users] NAND S3C2410 LN2410SBC

[Pantelis Antoniou]

David Farrell wrote:
> Hello to the group, I reviewed the email archive I hope I
> don't repeat anything.
>  
> I have just created (mostly copied) a port to the CyberLab
> LN2410SBC board.  I have several questions before
> submitting any patch.
>  
> What is the status of the NAND code? I have the S3C2410
> reporting my chip but I have 2040 or 2048 bad blocks.  I'll
> work through it, but I don't want to repeat what someone else
> has aleady done.
>  
> I have reviewed the thread on the arm920t subdirectory
> structure, I'll follow this for s3c2410x.
>  
> Why are there flash drivers in the board directories?
> Is this general enough to be a driver?  Should CMD_xxx
> or CONFIG_ xxx defines be used at this level?
>  
> ps: There is a problem with the memsetup.S code of the
> smdk2410 the sub r0, r0, r1 should be sub r2, r0,  r1 to
> copy the table correctly.
>  
> David. 
>  
Hi David.

I'm back from vacations, and I'll try to take a look at the NAND
code.

Please be a little patient...

Regards

Pantelis