[U-Boot-Users] Anyone has success with MX1ADS?

[W Sung]

Hi George,

I converted the SREC to boostrap mode format and
download U-boot to RAM. Can it I do that? or I must
burn it to flash first?

Anyway, I will checkout the latest u-boot from CVS and
try your approach again.

waikong

 --- "George G. Davis" <gdavis at mvista.com> 內容：
> On Mon, Aug 23, 2004 at 07:35:00PM +0800, Wai-Kong
> Sung wrote:
> > Hi,
> > 
> > I am new with U-Boot and I am trying to use it
> with Moto's MX1ADS. I 
> > downloaded the u-boot-2004-08-18-2000.tar.bz2 from
> the DEX ftp site. I 
> > It compiled( mx1ads_config and
> CROSS_COMPILE=arm-linux-) without problem 
> > but didn't run when I downloaded to the board. I
> am using the MX1 
> > bootstrap mode to download U-Boot.
> 
> Did you use bootstrap mode to merely download it or
> install it into flash?
> 
> > 
> > The board is functioning since I can download and
> run other applications.
> > 
> > Any pointer would be greatly appreciate!
> 
> FWIW, I just confirmed that latest u-boot CVS +/- a
> few hours works on my
> MX1ADS board:
> 
> 
> U-Boot 1.1.2 (Aug 24 2004 - 11:49:40)
> 
> U-Boot code: 08400000 -> 08418414  BSS: -> 0841C868
> RAM Configuration:
> Bank #0: 08000000 64 MB
> Flash: 16 MB
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> MX1ADS board with MC9328 MX1 (0L44N), Silicon ID
> 0x0005901d
> 
> Hit any key to stop autoboot:  0
> MX1ADS$
> 
> 
> I used the mx1flash install utility included in the
> MX1 RedBoot package
> available from Freescale to install u-boot into
> SyncFlash on my board.
> After installing u-boot into flash via mx1flash
> (using bootstrap mode),
> I set S22-2 (BOOT1) OFF and u-boot works ok for me.
> Default console is on
> UART1 at 115200n8.
> 
> --
> Regards,
> George
>  

__________________________________
薛凱琪聲色圖案、語音聊天、寬頻Webcam等多項功能
全新 Yahoo! Messenger
http://messenger.yahoo.com.hk/