[U-Boot-Users] Could one image work with both LCD and serial console?

Sam Song samsongshu at yahoo.com.cn
Sun Aug 29 04:37:40 CEST 2004


Wolfgang Denk <wd at denx.de> wrote:

> > CONFIG_LCD. Also,it seems that I cannot make
> > serial
> 
> Just type "setenv stdout serial;setenv stdin serial"
> - if  you  want;
> you can put this command sequence in the "preboot"
> variable (assuming
> you enabled CONFIG_PREBOOT for your board).

OK. I will test it by now and see what happens. I
didn't define CONFIG_PREBOOT for my board.

> > console image switch to LCD output by simply
> setting
> > stderr and stdout as LCD. Any idea?
> 
> You can do this. You can switch any time between
> serial, LCD, and any
> other of the configured I/O devices.

So nice to get the solid answer. This means I should
adjust some explanation in board/RPXlite_dw/readme.
There are some misleading content I did. Wait my patch
later.

Best regards,

Sam

_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜,带您闯入音乐殿堂
http://music.yisou.com/
美女明星应有尽有,搜遍美图、艳图和酷图
http://image.yisou.com
1G就是1000兆,雅虎电邮自助扩容!
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/




More information about the U-Boot mailing list