[U-Boot-Users] Can't detect CFI flash in kernel
marc.leeman at gmail.com
Tue Dec 7 08:40:40 CET 2004
> > CFI: Found no TQM8xxL Bank 0 device at location zero
CFI cannot probe your flash, maybe your mapping is not correct.
> Then system hangs forever. I read the manual(13.2.6. Linux hangs after
> uncompressing the kernel), and I make sure that the clocks_in_mhz and
> CFG_IMMR are right defined. I doubt the reason is the flash can't be found
> by kernel.
euhm, what would be the error? By the time you get to this point, any
responsibility of u-boot is long gone (did it's job and now it's up to
> Did I config something wrong?
Yes, posting to the wrong mailinglist >:)
You will need to check your kernel config and/or flash config mapping
ash nazg durbatulûk, ash nazg gimbatul,
ash nazg thrakatulûk agh burzum-ishi krimpatul
More information about the U-Boot