[U-Boot-Users] PCI interrupt routing on 440GX

Stefan Roese stefan.roese at esd-electronics.com
Tue Dec 7 10:09:49 CET 2004

Hello Renaud,

> I have a PrPMC based on the 440GX.
> As a monarch the PCI interrupt A to D are connected to GPIO3 to GPIO 6
> I was wondering how to tell linux  the correct interrupt line number.
> where in the code can I set this up?

The pci interrupt routing is setup in the board specific platform file.
Please take a look at the "arch/ppc/platforms/cpci405.c" file for

Best regards,

More information about the U-Boot mailing list