[U-Boot-Users] Data abort while mtest

[Wolfgang Denk]

In message <001301c4e35f$f7a48890$0400a8c0 at praveenvs> you wrote:
> 
> My Ram is 32 MB...& so the RAM is from A0000000 to A2000000 
> Is there anything wrong in the RAM Configuration.?. 
> But I am able to properly write to different location using mw & 
> display it by using md 
> My U-boot is from A07E0000 -> A07F59D8..
> 
> What might be the problem ?

Isn't this obvious? You are overwriting the U-Boot code when you  run
a memory test that includes this area.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
An age is called Dark not because  the  light  fails  to  shine,  but
because people refuse to see it.           -- James Michener, "Space"