[U-Boot-Users] Data abort while mtest
Praveen V.S.
praveenvs at hathway.com
Thu Dec 16 12:11:08 CET 2004
Thanks for your suggestions,
We tried with the CFG_MEMTEST_SCRATCH giving it A1FFFFFC.
But again the same problem..., Data Abort....
My Ram is 32 MB...& so the RAM is from A0000000 to A2000000
Is there anything wrong in the RAM Configuration.?.
But I am able to properly write to different location using mw &
display it by using md
My U-boot is from A07E0000 -> A07F59D8..
What might be the problem ?
Regards
Praveen
-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Anders
Larsen
Sent: Thursday, December 16, 2004 3:21 PM
To: praveen at spacomp.com
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Data abort while mtest
praveen at spacomp.com schreibt:
>We have successfuuly configured U-boot for our custom board based on
>PXA255. The Board is having 32 MB ram. I am able to sucessfully run the
>coimmands, md, mw etc..
>But if I give mtest( CFG_ALT_MEMTEST is defined) I am getting dataabort
Hi,
on ARM (including PXA), you MUST set CFG_MEMTEST_SCRATCH to
a valid RAM address (outside the area to be tested, e.g.
the last 32-bit word of your RAM), otherwise the memtest
will try to write to address 0 (which is flash).
To quote the README:
"- CFG_MEMTEST_SCRATCH:
Scratch address used by the alternate memory test
You only need to set this if address zero isn't writeable"
Cheers
Anders
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
More information about the U-Boot
mailing list