[U-Boot-Users] Boot Code Chip Select

[Wolfgang Denk]

In message <20040206040100.89537.qmail at web40407.mail.yahoo.com> you wrote:
> 
> I have a MPC852T based board with a Boot Flash on CS0
> and User Flash on CS2. 
...
> Can we load the u-boot code on to the User Flash on
> CS1, and boot from there ? If so what are the changes
> required ?

No, you cannot, unless you modify the processor :-)

The MPC8xx will always boot from the device attached to CS0.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Anyone who isn't confused here doesn't really know what's going on.