[U-Boot-Users] Placing u-boot into onboard flash

[Wolfgang Denk]

In message <603BA0CFF3788E46A0DB0918D9AA95100A09734F at sj580004wcom.int.lantronix.com> you wrote:
> I want to put u-boot into the on-board flash, however the lousy flash
> programmer we have does not work.  Is there a way I flash u-boot using
> Yamon, or perhaps alter some portion of u-boot - any other ideas other

If you have Linux running, you can use the Linux MTD drivers...

> than "buy a new flash programmer"?

Gnghhghh [sound of drudgingly suppressing the recommendation to buy a
BDI2000 :-)]

Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Time is fluid ... like a river with currents, eddies, backwash.
	-- Spock, "The City on the Edge of Forever", stardate 3134.0