[U-Boot-Users] [PATCH] Support for OMAP1610 H2 platform

[Kamat, Nishant]

Hi all,

This patch adds support for the OMAP1610 H2 platform. It also adds to
cpu/arm926ejs/interrupt.c the fixes that Richard Woodruff had submitted for
arm925 (see below). Finally, a minor timer related bug in OMAP1610 Innovator
is fixed and support for booting through Flash or ROM is added for both the
OMAP1610 Innovator and H2.

Best regards,
Nishant



> -----Original Message-----
> From: Woodruff, Richard 
> Sent: Thursday, October 16, 2003 12:28 PM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] cpu/arm925 timer fixes.
> 
> 
> Hello,
> 
> This patch fixes a few bugs which made udelay() not work 
> properly on 925 based systems.  A while back when I increased 
> my boards clock speed I ran into quite a few problems which 
> resulted in these fixes.
> 
> I think the Innovator should be switched over to use a real 
> udelay code instead of its busy spins. They do not scale at 
> all with clock speed, and do not keep the useful timestamp 
> properly updating.
> 
> Regards,
> 
> Richard W.
> 
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: patch_for_OMAP1610_H2.changelog
Type: application/octet-stream
Size: 293 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040213/d2db34ca/attachment.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: patch_for_OMAP1610_H2.diff
Type: application/octet-stream
Size: 20285 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040213/d2db34ca/attachment-0001.obj