[U-Boot-Users] I can get u-boot working on my ixp425 board.
Wolfgang Denk
wd at denx.de
Fri Feb 20 09:54:15 CET 2004
In message <40363731.1060607 at smartbridges.com> you wrote:
>
> I got the u-boot-1.0.0. And make clean, make ixdp425_config , and make.
> The 1st first time there is a "Soft FP" issue. After I changed
Then your cross toolchain is misconfigured / inadequate for this job.
> cpu/ixp/config.mk as following
>
> " PLATFORM_RELFLAGS += -mhard-float #Change -msoft-float to -mhard-float"
Don;t do this!!!
> u-boot.bin onhand, that one can work). What could be the problem in the
> configuration or something else?
Make sure to use a toolchain that supports soft-float.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Hindsight is an exact science.
More information about the U-Boot
mailing list