[U-Boot-Users] Production und U-boot
Matias Sundman (AL/EAB)
matias.sundman at ericsson.com
Thu Jan 29 12:45:17 CET 2004
I would like to have your views on how U-boot is used in production.
We will have Boards that has U-boot as the bootloader. U-boot will be burned in flash by means of JTAG.
Later the boards will be put in a subrack for parallel SW download and Flashing.
Now what I am thinking of is to program U-boot to recognize a pin in the backplane, if the pin is set
the board is in a production facility - BOOTP and a TFTP download of the flash image shall be done, and burned in flash ( by U-boot ). The pin is set by production staff.
If it is not set U-boot shall start a Image from flash ( Containing Linux and a Rootfile system ) since it is in a "sharp" environment.
Any other ideas?
Cheers // Matias
More information about the U-Boot