[U-Boot-Users] [PATCH] Part 1 of 2 MPC85XXADS-20040716.patch-1 for TLB/DDR

Jon Loeliger jdl at freescale.com
Mon Jul 19 17:53:22 CEST 2004

On Mon, 2004-07-19 at 10:46, Wolfgang Denk wrote:

> > Where did I go wrong?
> On 2004-07-16 you sent these messages:
> [PATCH] MPC85XXADS-20040716.patch for TLB/DDR
> http://sourceforge.net/mailarchive/forum.php?thread_id=5136550&forum_id=12898
> [PATCH] Part 1 of 2 MPC85XXADS-20040716.patch-1 for TLB/DDR
> http://sourceforge.net/mailarchive/forum.php?thread_id=5137350&forum_id=12898
> [PATCH] Part 2 of 2 MPC85XXADS-20040716.patch-2 for TLB/DDR
> http://sourceforge.net/mailarchive/forum.php?thread_id=5137351&forum_id=12898
> Now is this all the same stuff, or two or maybe even three  different
> patches?

Right.  The first message was rejected as being too large.
I broke it into two parts that do the same patch and
resubmitted it with a -1 and a -2 suffix.

> The subject says "for TLB/DDR".

Yes, I rewrote the TLB and DDR handling.

> Changesets that contain different, unrelated modifications  shall  be
> submitted as SEPARATE patches, one patch per changeset.

They aren't really unreleated.  For example, there were missing
TLB entries for PCI address spaces that were added.  The removal
of the molding options was specifically to clean up the TLBs.

> To make this short: which of your 3 messages shall be added?

Please add all of them as they all apply and are important.

> Wolfgang Denk


More information about the U-Boot mailing list