[U-Boot-Users] u-boot on the DB64360

[Frank]

Are you sure the baudrate is set corectly. What you described
sounds like a classic clock divider/baudrate not set
correctly...
--- Amit Shah <amitshah at gmx.net> wrote:
> Hi Frank,
> 
> On Tuesday 20 Jul 2004 23:54, Frank wrote:
> > I ported this board over to our in house designed board
> based on
> > this system controller and it works just fine. What problems
> are
> > you having...
> 
> I put the u-boot binary in the Flash area and reset the board.
> I didn't see 
> any console (serial) output, rather I saw some junk
> characters. The baud 
> rates were set correctly.
> 
> I didn't have to modify anything in the config, since
> everything was set 
> correctly (baud, processor type, etc).
> 
> BTW, this is a board with two 750FX processors.
> 
> Amit.
> -- 
> Amit Shah
> http://amitshah.nav.to/
> 



	
		
__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/