[U-Boot-Users] Software emulation exception on entry into RAM

[Wolfgang Denk]

In message <31ADFA827355984B9E2A161514595B561C3321 at lpdsrv04.logicpd.com> you wrote:
>
> I can't be sure on this at all, but I ran into an SDRAM problem recently on
> a different board than yours and figured out the following solution.
> 
> In the meantime, take a look at the flow of the platform.S (or equivalent)
> file in your board directory.  I've been working with a board that is
> similar to the Innovator, but the memory map was a little different, and

You are talking about  a  completely  different  architecture,  which
cannot be compared to a MPC8xx.

> In summary, check to make sure that when you set a register configuration
> value, that it actually makes it to that register.  Hopefully this
> information has been helpful and not just completely unrelated.

Sorry, but it does not apply at all for MPC8xx.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Everyting looks interesting until you do it. Then you find it's  just
another job.                     - Terry Pratchett, _Moving Pictures_