[U-Boot-Users] Re:Help :: PQ2FADS / BDI2000
Yuli Barcohen
yuli at arabellasw.com
Wed Mar 10 18:16:17 CET 2004
uboot> Comrades, I have the Motorola PQ2FADS reference board and
uboot> have successfully built Uboot-1.0.2 to it. I also have a
uboot> BDI2000. When I try to debug the PQ2FADS board with the
uboot> BDI2000 solely ( by means of e.g TI/TC ) or with ppc82xx_gdb
uboot> I get a ,
uboot> reset detected at 0xfff00124
uboot> Always, I can never debug boyond this point due to the reset.
uboot> When I run without the BDI2000 , Uboot starts fine. Can
uboot> someone give me a hint on what I am doing wrong...
You put a wrong value (0x4700000) into the IMMR in the BDI configuration
file. U-Boot is configured to start with FADS default IMMR (0x0F000000),
then it changes it to 0xF0000000 which is acceptable for Linux (unlike
0x4700000). When U-Boot first access the internal RAM using
CFG_DEFAULT_IMMR (0x0F000000), bus error and subsequent reset happen
because BDI already changed the IMMR.
--
========================================================================
Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader
yuli at arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel
========================================================================
More information about the U-Boot
mailing list