[U-Boot-Users] Patch: Support for PQ27e (8247/48/71/72) chips and MPC8272ADS board

[Kumar Gala]

Yuli,

I agree with only enabling ports that will be used.  I guess I would  
expect the port to be used in Linux.  I'm working on an updated 2.6 SCC  
uart driver and realized that I needed to enable the 2nd port in BCSR.   
I had expected that u-boot would have already handled it.

- kumar

On Mar 16, 2004, at 1:23 AM, Yuli Barcohen wrote:

>>>>>> Kumar Gala writes:
>
>     Kumar> Looking at the patch, I was wondering if there was any  
> reason
>     Kumar> to not enable both RS232 ports by default.
>
> Only the console port was enabled before the patch. Is there any reason
> for the patch to change this behaviour? Also, I see no reason to enable
> any peripheral which isn't going to be used.
>
> --  
> ======================================================================= 
> =
>  Yuli Barcohen       | Phone +972-9-765-1788 |  Software Project Leader
>  yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella Software,  
> Israel
> ======================================================================= 
> =