[U-Boot-Users] SC520 BOARD PROBLEM

[Wolfgang Kanovsky]

Hi all,

i have a strenght problem ...
uboot is comming up but when i enter any command its freezing ....

anyone here how have an idea why ? ..

@ Wolfgang Denk -- i figured out that in the SC520 implementation (i386 -
board.c ) the
relocation to Dram and copy of the commands is not implemented -- is that
correct ?
im to new to Uboot to be sure about that .. so please can you look at
board.c and
give me a feedback if im right ..then i will try to port that part maybe
thats the reason why im freezing ?

or is has someone still done this part in the past ?


thanks
Wolfgang Kanovsky

---------------------------------------------------------------

U-Boot 1.0.2 (Mar 19 2004 - 09:46:37)

U-Boot code: 08FC0000 -> 08FDA389  data: 00400000 -> 00400AF3
        BSS: 00400AF4 -> 0040AF5F stack: 0040AF60 -> 00412F5F
DRAM Configuration:
Bank #0: 00000000 64 MB
Bank 0: Micron / Intel 28F640J3A
Flash:  8 MB
*** Warning - bad CRC, using default environment

set_irq(): map INTA to IRQ9
        00  11  8086  1209  0200  09
In:    serial
Out:   serial
Err:   serial
Net:   i82559#0
***SC520 hopf BOARD last stage init done***
### main_loop entered: bootdelay=5

### main_loop: bootcmd="<UNDEFINED>"
boot > H

---- frozen !!!!!!!!!!!!!!!!!!!!!!!!!

_______________________________________________________________________

Realtime Distributed Computing Systems -
Ruprecht & Partner OEG

Hopf Industriefunkuhren           SUN Microsystems iForce Partner
Master Reseller A*CZ*SK*HR*SLO    Oracle Partner

Embelgasse 66/10-11
A - 1050 Wien

Tel:  +43 1 5455077-0
Fax:  +43 1 5455077-11
mailto:office at rdcs.at
Internet: http://www.rdcs.at/
_____________________________________________________________________