[U-Boot-Users] U-boot and Stratix development board Issue

[CG]

I presume that's u-boot waits during a while.  I see the kermit window and
no transfer is done.

About loading u-boot.bin.  I read the instructions from /doc directory in
order to copy u-boot into the flash.

Thanks

Christian

----- Original Message -----
From: "Wolfgang Denk" <wd at denx.de>
To: <christian at mcdi.com>
Cc: <u-boot-users at lists.sourceforge.net>
Sent: Tuesday, May 25, 2004 8:33 AM
Subject: Re: [U-Boot-Users] U-boot and Stratix development board Issue


> In message <200405251206.i4PC6bxG009356 at web184.megawebservers.com> you
wrote:
> >
> > I would like to know if someone has already encountered this problem.  I
> > cannot execute this command : loadb 800000 using kermit protocol in
order to
> > transfer a file to the RAM.  It waits during a while and after, the
transfer
> > is canceled.
>
> What exactly is the error message? You write "it  waits"  -  what  is
> "it"? U-Boot? or Kermit? or what?
>
> > U-boot has been compiled for the Stratix Edition dev. board using the
Nios
> > processor (standard 32).
> >
> > I can transfer and execute u-boot.srec by using this command :
nios-run -r u-
> > boot.srec.
> >
> > After, I execute hyperterminal in order to transfer u-boot.bin and copy
it to
> > the FLASH.
>
> Ummm.. when you already loaded u-boot.srec, then why do you  need  to
> load  u-boot.bin?  Both  files  contain  the  same, just in different
> formats.
>
> > Unfortunately, I cannot use loadb... :-(
>
> Please provide more information - what exactly you are  doing,  which
> commands you enter, which error messages are printed, etc.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> Nothing ever becomes real until it is experienced.       - John Keats
>