[U-Boot-Users] U-boot Arm kernel (2.4.19-rmk7) booting problem.

[Annamalai Prakash]

Hi ,
 
     i m using 2.4.19-rmk7 kernel with u-boot. while power up my board i
can able to see the following .

U-Boot 1.1.1 (May 27 2004 - 12:22:57)
                                                                                                                      
U-Boot code: 00F80000 -> 00F91500  BSS: -> 00F92A10
RAM Configuration:
Bank #0: 00000000 16 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
## Booting image at 50040000 ...
   Image Name:   Linux Kernel Image
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    707682 Bytes = 691.1 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
 
   Starting Kernel ...
 
            
         I am very newbie to ARM platform. i dont know what is Load
Address, and Entry point, where should i find in my kernle source ?.
should i load ramdisk before kernel booting ?. i have set the follwoing
Environment variables. 

bootargs=root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200
bootcmd=bootm 50040000
bootdelay=3
baudrate=115200
ethaddr=08:00:3e:26:0a:5b
ipaddr=192.168.0.21
serverip=192.168.0.250
netmask=255.255.0.0
stdin=serial
stdout=serial
stderr=serial
                                                                                                                      
Environment size: 249/131068 bytes

Expecting your Help

Thanks
Prakash