[U-Boot-Users] HW Addr different to Vendor information

[Devraj Mukherjee]

Hi everyone,

We are tring to get the ethernet working on our board. Here is what we 
have been trying. Our DHCP server gives addresses in the range of 10.0.1.x

Our vendor has documented that our MAC address is 00:08:EE:00:41:60 and 
LogicLoader (the default bootloader) would get an IP with this MAC 
address. It's interesting to see that U-Boot with the patches thinks 
that the HW Addr is 04:04:04:33:04:04

Any ideas, experiences?

Devraj

LPD7A400> setenv serverip 10.0.1.1
LPD7A400> ping 10.0.1.1
SMC91111:PHY auto-negotiate timed out
SMC91111:PHY auto-negotiate timed out
Using MAC Address 04:04:04:33:04:04
ping failed; host 10.0.1.1 is not alive
LPD7A400> setenv ethaddr 00:08:EE:00:41:60
LPD7A400> ping 10.0.1.1
SMC91111:PHY auto-negotiate timed out
SMC91111:PHY auto-negotiate timed out

Warning: MAC addresses don't match:
         HW MAC address:  04:04:04:33:04:04
         "ethaddr" value: 00:08:EE:00:41:60
Using MAC Address 00:08:EE:00:41:60
ping failed; host 10.0.1.1 is not alive
LPD7A400> ping 10.0.1.3
Unknown command 'ping' - try 'help'
LPD7A400> ping 10.0.1.3
SMC91111:PHY auto-negotiate timed out
SMC91111:PHY auto-negotiate timed out

Warning: MAC addresses don't match:
         HW MAC address:  04:04:04:33:04:04
         "ethaddr" value: 00:08:EE:00:41:60
Using MAC Address 00:08:EE:00:41:60
ping failed; host 10.0.1.3 is not alive

-- 
----------------------------------------------------------------------
Devraj Mukherjee, Eternity Technologies Pty. Ltd. Australia
Host: Debian (Sarge) 3.1 Kernel 2.4.27-1-686 / GCC version 3.3.5
Target: LPD7A400 (ARM9) LogicPD eval. board / ARM GCC 3.3 GlibC 2.3.2
LAMP environment specs. Apache: 2.0.52 PHP: 5 MySQL: 4.0.21
----------------------------------------------------------------------