[U-Boot-Users] u-boot can not boot after change flashdisk from 8M to 16M

[Travis Sawyer]

On Fri, 2004-11-19 at 09:46, Tyler Jia wrote:
> Hello, 
> 
>   Because need more flash disk space, I replace
> ppc405ep board flashdisk 8M (intel 28F640j3
> 8MByte=64Mbite= 128k x 64) to 16M flashdisk (intel
> 28F128j3 16Mbyte=128Mbit=128k x 128). 
<SNIP>
> ff800000-ffffffff, u-boot.bin image address is from
> fffe0000-ffffffff, then the new 16M flashdisk is from
> ff000000-ffffffff, I still put the u-boot.bin in
> fffe0000-ffffffff in 16M flash memory.

Have you ensured you programmed u-boot to 0xFFF80000.
AFAIK, the ppc4xx series must have u-boot there.

-travis