[U-Boot-Users] DB1000 Little-Endian U-Boot

[Charles Eidsness]

Hi All,

I would like to use u-boot on my DB1000 card (with an AMD Au1000 
processor) in little endian mode. After a little bit of playing around I 
have gotten it to compile, load in to the parameter FLASH and run from 
the Yamon prompt, i.e. go bec00000. But, when I switch to boot 
completely from u-boot in the parameter flash (switch S8) the card just 
hangs. Does anyone have any ideas?

Thanks,
Charles