[U-Boot-Users] problem about pci target mode

[liuyong]

my cpu is 440gx, and my board is like ocotea.
the u-boot version is 1.1.1.
I want to configure the board works at the target mode.
I check the register sdr0_sdstp1 is 0x80010980, so i am
sure that PAE and PHCE is disabled, and only PISE is enabled.
But the register sdr0_xcr, sdr0_xpllc and sdr0_xplld is 0, 
which is initialized with sdr0_sdstp1. the host cannot 
recognsie the board as a PCI device. 
Maybe i forget to configure some registers, somebody help me.   
 				

　　　　　　　　liuyong
　　　　　　　　ly at ncic.ac.cn
　　　　　　　　　　2004-10-09