[U-Boot-Users] Doubts about usage of BDI2000 !

[George G. Davis]

On Thu, Oct 14, 2004 at 11:06:10PM +0200, Wolfgang Denk wrote:
> > (gdb) target remote 192.168.226.159:2001
> > 192.168.226.159:2001: Connection refused.
> > (gdb) target remote bdi:2001
> > bdi:2001: Connection refused.
> 
> Seems you BDI2000  is  configured  for  a  different  IP  address  or
> network, or not powered on, or not connected to the network.

FWIW, the BDI2000 responds this way when it is either improperly configured
or did not detect a device on the scan chain. I verified this by attempting
to do `target remote bdi:2001` to my BDI2000 when it was not connected to
a target, it refuses the connection. OTOH, it accepted a telnet session and
showed that no target was detected as per usual. Please verify that you've
properly configured your BDI2000, i.e. read fancy the manual. : P

--
Regards,
George