[U-Boot-Users] Booting U-Boot from tftp

[Wolfgang Denk]

In message <20041029121201.42802.qmail at web25009.mail.ukl.yahoo.com> you wrote:
> 
> None taken and you're right about that, of course.
> However, if it's not too difficult could you tell me
> how? 

It does not work for the purpose you intend to iuse it, so it's jusrt
a waste of time - yours and mine.

> I could also use a debugger to load u-boot. I tried
> doing the following after a piece of advice on the
> ppcboot mailing list (google for ppcboot +riscwatch):

No. Get a real debugger. Get a BDI2000.

> * change config/WALNUT405.h CFG_FLASH_BASE (and
> CFG_MONITOR_BASE) to (ADDR_IN_RAM)

You don't want to do that. Build U-Boot as it is configured, and  use
this.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded/Electronica Munich, Nov 09 - 12, Hall A.6 Booth 513
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I read part of it all the way through.