[U-Boot-Users] help: images in example directory are invalid
Benjamin Collar
benjamin.collar at siemens.com
Thu Sep 30 12:39:35 CEST 2004
Greetings folks
As I've mentioned, u-boot is running on the board now. However, I've so
far failed to get a stand-alone application to run. For instance, when I
load hello_world.srec, then check it with iminfo, I get "bad magic
number".
Using mkimage -l hello_world.srec, I get 'Bad Magic Number:
"hello_world.srec" is no valid image' I get the same result for
hello_world (the elf format).
Using powerpc-linux-objdump -fs hello_world.srec, I see:
hello_world.srec: file format srec
architecture: UNKNOWN!, flags 0x00000000:
start address 0x00040004
Contents of section .sec1:
40000 000182b0 9421ffd8 7c0802a6 429f0005 .....!..|...B...
40010 bf610014 7fc802a6 9001002c 801efff0 .a.........,....
40020 7c7c1b78 7fc0f214 7c832378 7c9b2378 ||.x....|.#x|.#x
Can anyone explain why u-boot is building invalid images?
Thanks
Ben
--
Benjamin Collar
Siemens AG
CT SE 2
Embedded Linux
089-636-53711
More information about the U-Boot
mailing list