[U-Boot-Users] using u-bbot with new platform

Marcos Lois Bermúdez marcos.lois at teaxul.com
Mon Apr 11 17:55:31 CEST 2005


I'm a newbye in u-boot, i will use it in a hardware platform based in 
PXA255, iwill try to get ready the basic stuff, flash, RAM, uart, i will 
base it on any PXA255 board that already supported by u-boot.

My problem is that my hardware don't have a ethernet card, and it will 
be very usefull in the development process, i have a pcmcia card that is 
a tunlip_cs linux driver i think porting it, but i not have idea of what 
kind of considerations i need to taek in mind for pcmcia based card. If 
there anybody that try this, or another pcmcia card that have better 
support in u-boot, please help me.


Marcos Lois Bermúdez
Departamento I+D+i
Tecnicas Electronicas Aplicadas Xulio S.A.

Email: 	   marcos.lois at teaxul.com
Telefono:  +34 986 462 026
Fax:       +34 986 460 816
Direccion: Ctra. de Bayona, 283 - Aptdo. 8.110
           C.P. 36330 Vigo - Pontevedra

More information about the U-Boot mailing list