[U-Boot-Users] using u-bbot with new platform
cliff.brake at gmail.com
Mon Apr 11 18:39:51 CEST 2005
On Apr 11, 2005 11:55 AM, Marcos Lois Bermúdez <marcos.lois at teaxul.com> wrote:
> I'm a newbye in u-boot, i will use it in a hardware platform based in
> PXA255, iwill try to get ready the basic stuff, flash, RAM, uart, i will
> base it on any PXA255 board that already supported by u-boot.
> My problem is that my hardware don't have a ethernet card, and it will
> be very usefull in the development process, i have a pcmcia card that is
> a tunlip_cs linux driver i think porting it, but i not have idea of what
> kind of considerations i need to taek in mind for pcmcia based card. If
> there anybody that try this, or another pcmcia card that have better
> support in u-boot, please help me.
I don't have any answers on the PCMCIA issue, but one other option
that may be useful is to load images from a MMC card. A MMC interface
is very easy to get working (3 wires).
More information about the U-Boot