[U-Boot-Users] Cannot boot from a uImage on the lite5200

[Wolfgang Denk]

In message <528646bc050420163579a4fefd at mail.gmail.com> you wrote:
>
> Do you mean the bootstrap stuff that's wrapped around a vmlinux.gz to

right.

> create a zImage, or do you mean arch/ppc/kernel/setup.c and others?=20
> I'm building the uImage directly from the vmlinux.gz, so I don't have
> any of the zImage stuff.

OK.

> It's looking more like I've got a problem with the hardware
> configuration on the Linux side now.  Time to step through init
> code....

Can you try the same image on different hardware? Is this an original
lite5200? [If yes, feel free to send me your kernel image and I  will
run it on our systems [not to the list, please]].

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The number you have dialed is imaginary. Please divide by 0  and  try
again.