[U-Boot-Users] U-boot 1.1.2 on SMDK2410

[Tehn-Yit Chin]

Reading through the source code, it indicated that it may possibly
execute out of RAM at address 0x33F80000 out of the box. However, I was
mistaken.

Thanks for your advice.

Tehn Yit Chin 
Software Engineer, Grey Innovation Pty. Ltd.

-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de] 
Sent: Tuesday, 26 April 2005 10:45 PM
To: Tehn-Yit Chin
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] U-boot 1.1.2 on SMDK2410 

In message
<9AEDBAA573BBD346BCF9637D80097D910FEE41 at greysvr02.GreyInnovation.com>
you wrote:
> 
> We attempting to bring u-boot 1.1.2 up on a SMDK2410 board and are
...
> Using a ARM RealView ICE, I downloaded the resulting u-boot.bin to 
> address 0x33F80000. Set the PC at 0x33F8000, and start the code

What makes you think this should work?

> execution. I was hoping that the serial port would come alive but 
> nothing came out. No signs of life was showing from the board.

Thisis only to  be  expected.  Please  install  U-Boot  in  flash  as
required, and then simply reset the board to start it.


Best regards,

Wolfgang Denk

-- 

"The greatest warriors are the ones who fight for peace."
- Holly Near